We’ve all been there: you roll up a pair of pants—maybe for yourself, or maybe for your kids while they grow into them—and within twenty minutes of walking around, the cuffs start unrolling and dragging into your shoes. It scuffs up the fabric, ruins the threads, and just looks messy.
Cuffed pants and high-end selvedge denim are back in style, but keeping those folds in place throughout the day can be frustrating. That’s why I came up with a simple, semi-permanent cuff method using the StitchClip. It lets you lock your cuffs in place at an exact length so they never come loose while walking, but whenever you want to let the pants down or change the hem, all you have to do is snip a couple of little threads with a seam ripper.
Here is how you can do it yourself in just a few minutes.
Marking and Folding Your Hem
To start, turn the pant leg inside out. For this demonstration, we are creating a 1.5-inch double-rolled cuff. Using a washable, non-permanent marker, make a line of reference dots at 1.5 inches and 3 inches from the raw edge of the fabric.
Next, fold the fabric up until the first set of dots hits the bottom edge. Once that fold is flat, roll it one more time so the second set of dots rests at the bottom. Make sure the fabric inside lies flat with no bunching or crumpled layers.
Setting Your Stitches with the StitchClip
Now comes the stitching. Thread your needle with thread that matches your pant interior. Position the StitchClip right in the center of your cuff.
Starting from the main entrance hole on the clip, push your needle through so your thread starts and ends on the inside of the pant leg. Loop the needle through the back guide hole two or three times. Move the clip slightly to the left and repeat the process with a small loop, then do the exact same thing on the right side.
If you have tried hand-sewing before, you know that keeping finger pressure on thick folds while trying to hit the exact same needle hole repeatedly is tough. The StitchClip holds the fabric steady and guides the needle into the exact same spot every pass.
Finishing the Cuff
Once your three small stitch loops are in place, tie off the loose thread ends on the inside and trim the excess.
That’s all there is to it. You get a clean, secure cuff held by tiny, discrete stitches that will stay locked in place for as long as you want. It is an easy way to customize thrift-store finds, keep your kids' clothes fitting just right, or adjust your own wardrobe without ever touching a sewing machine.
Watch the Full Video Tutorial
If you would prefer to follow along step-by-step with the video demonstration, the link is provided here: